UV DTF Sticker Application

UV DTF Sticker - How To Apply:

1. Clean the surface of your product thoroughly. Apply only to
   smooth surfaces.
   
2. Use firm pressure to squeegee the back of the sticker, moving
   the squeegee back and forth several times.
3. Carefully remove the sticker from its backing, especially if the design includes fine lines, peeling slowly. If any parts don’t peel, squeegee the back again.
4. Apply the sticker to your product carefully, as once it's in place, it cannot be removed.
5. Apply firm pressure to the already placed sticker by running the squeegee over the entire design area. This will help securely press the design onto your product.
6. Slowly remove the clear part of the sticker. If any part of your design isn’t sticking, press it back down with the squeegee.